Weidmuller PCB Terminal Block Selection

BL Plug Socket Blocks for Printed Circuit Boards

BLA Socket Blocks for Printed Circuit Boards

BLZ Socket Blocks for Printed Circuit Boards

SL Pin Headers for Printed Circuit Boards

SLA Pin Headers for Printed Circuit Board Connectors

MK 8 Series Printed Circuit Board Connectors

Printed Circuit Board Terminals

Weidmuller's ever expanding range of printed circuit board terminals has been designed to cater to the many varied application requirements faced by today's Design Engineers.

To solve these needs, a range of PCB terminals that offer a wide selection of clamping techniques, cable entry angles, multiple levels for higher density requirements, pitch spacing from 3.5 mm to 15.00 mm, wire acceptance up to 4 AWG, high current and high voltage possibilities have all been produced.

This terminal block product line is complemented by a wide range of accessories that complete the comprehensive range.

Features:

• pitches ranging from 3.50 mm to 15.00 mm
• wide selection of clamping techniques
• voltages up to 600 V
• currents up to 85 amp
• Variety of wire entry angles
• double and triple level terminals for higher density applications
• footprint compatible series to offer more flexibility and less PCB re-design

Unimate Range - SLA/BLA

From Weidmuller only: the unique connector face with secure protection against incorrect insertion.

The pin headers and socket blocks of the SLA/BLA product family will only mate as a pair, i.e., only pin headers and socket blocks of the same number of pols will connect together.

This is not the only unique fieature of this Weidmuller classic! This 5.08 mm pitch product family is made from glass-fiber-reinforced PBT. The outstanding material properties are why the pin headers and socket blocks are able to withstand a continuous operating temperature of 120 deg C and increased ambient temperature.

There are three different connection techniques available: clamping yoke connection , TOP, and crimp connection. All the pin headers and socket blocks of the Unimate Range can be intermated as required. For the free connection of initiators and actuators, at interface elements and power supply units, and for motor control applications.

Product features

• double protection agains incorrect insertion
• protection against wiring errors
• suitable for continuously high operation temperature
• votage up to 300V
• current up to 10 Amp
• wire size up to 12 AWG
• glass fiber-reinforced thermoplastic polyester (PBT) is used as insulation material and flame-resistant according to UL 94 V-0
• large selection of accessories

Omnimate Range

The Omnimate Range offers a wide choice of connection techniques. All options are available in the socket blocks and pin plugs: leaf spring, clamping yoke, tension clamp, TOP, crimp, IDC and push-in connections. This versatility brings substantial benefits.

The comprehensive assortment of pin headers and socket blocks, the multitude of different angles between PCB, connectors and conductors in the fields, and the large selection of accessories permit the Omnimate Range to be used in a variety of applications, including motor control, free wiring of initiators and actuators, interface elements or in power supply units.

Product Features:

• choice of seven different connection techniques
• ease-of-use
• end-to-end stacking without loss of pitch
• thermoplastic polyester (PBT), or Liquid Crystal Polymer (LCP) is used as insulation material that is flame-resistant according to UL 94 V-0
• large selection of accessories